Muhammad Salman Siddiqui

Muhammad Salman Siddiqui

Professor

  • Institutt for maskinteknikk og teknologiledelse

Muhammad Salman Siddiqui is a Professor of Mechanical Engineering at the Faculty of Science and Technology, Norwegian University of Life Sciences (NMBU). Previously, he was a postdoctoral fellow and researcher at the Norwegian University of Science and Technology (NTNU), where he also earned his PhD in Applied Mathematics. He is currently the leader of Computational Science and Engineering Research Group within his department.


His primary research focuses on numerical and computational fluid dynamics applied to engineering systems. His work includes designing and developing software for aerodynamic assessments of offshore wind turbines, modeling and simulation of renewable energy resource harvesting, evaluating heating and cooling technologies for energy-efficient buildings, and creating reduced-order, multi-scale, and physics-based models.


He has co-authored more than 80 scientific publications in internationally recognized peer-reviewed journals and conference proceedings. As an active member of professional organizations such as Elsevier, Scopus, the American Society of Mechanical Engineers (ASME), and the American Institute of Aeronautics and Astronautics (AIAA), He regularly reviews scientific articles, book chapters, and project proposals in fields including wind energy, computational mechanics, computational fluid dynamics, energy systems, and environmental studies. He also serves as a topic editor for leading journals, including Energies, Applied System Innovation, and Sustainability.

  • Fagfelt
    • Computational Fluid Dynamics (CFD)
    • Mathematical modeling
    • Modeling and Simulation
    • Offshore Wind Engineering
    • Renewable Energy
  • Publikasjoner

    Liste med publikasjoner fra min forskning. (Cristin)

    Full list of publications can be accessed from ResearchGate or Google Scholar

    LIST OF PUBLICATION

    Journal publications.

    1. Wang, J., Xing, J., Siddiqui MS, Stawiarska, A., Yang, L. (2024). "Experimental investigation of wave-induced flapping foil for marine propulsion: Heave and pitch stiffness effect." Journal of Renewable Sustainable Energy, 16, 024702. DOI: 10.1063/5.0190664
    2. Christie, J., Lines, T., Simpson, D., Asim, T., Siddiqui MS, Islam, S. Z. (2024). "Numerical Investigations on the Transient Aerodynamic Performance Characterization of a Multibladed Vertical Axis Wind Turbine." Energies, 17(8), 1900. DOI: 10.3390/en17081900
    3. Mian, H. H., Franchina, N., Otman, K., Wang, G., Nygard, T. A., Siddiqui MS (2024). "Aerodynamic and Structural Assessment of Floating Wind Turbine Rotor Under Varying Tilt Angle." Journal of Physics conference series, 0, 0001.
    4. Mian, H. H., Stoevesandt, B., Ullah, H., Siddiqui MS (2024). "Hydrodynamic Response of Semi-Submersible FOWT Floaters: A Numerical Investigation of Wave and Mooring Parameter Dependencies." Journal of physics conference series, 0, 0001.
    5. Siddiqui MS, Badar, A. W., Yang, L., Saeed, M., Keprate, A. (2024). "Qualitative Investigation of Wake Composition in Offshore Wind Turbines: A Combined Computational and Statistical Analysis of Inner and Outer Blade Sections." E3S Solar Energy and Wind Power Generation, 487, 01001. DOI: 10.1051/e3sconf/202448701001
    6. Kouaissah, O., Franchina, N., Siddiqui MS, Persico, G. (2024). "A computational study on the performance and wake development of a tilted H-Shaped VAWT rotor." Renewable Energy, 222, 119932. DOI: 10.1016/j.renene.2023.119932
    7. Saeed, M., Berrouk, A. S., Al Wahedi, Y. F., Alam, K., Singh, M. P., Siddiqui MS, Almatrafi, E. (2024). "A machine learning-based study of sCO2 cycle precooler's design and performance with straight and zigzag channels." Applied Thermal Engineering, 236, 121522. DOI: 10.1016/j.applthermaleng.2023.121522
    8. Keprate, A., Bagalkot, N., Siddiqui MS, Sen, S. (2023). "Reliability analysis of 15MW horizontal axis wind turbine rotor blades using fluid-structure interaction simulation and adaptive kriging model." Ocean Engineering, 288, 116138. DOI: 10.1016/j.oceaneng.2023.116138
    9. Rahman, M., Waheed, H., Turkyilmazoglu, M., Siddiqui MS (2023). "Darcy--Brinkman porous medium for dusty fluid flow with steady boundary layer flow in the presence of slip effect." International Journal of Modern Physics B, 15(2), 2450152. DOI: 10.1142/S0217979224501522
    10. Mian, H. H., Siddiqui MS, Yang, L., Keprate, A., Badar, A. W. (2023). "Effect of leading-edge erosion on the performance of offshore horizontal axis wind turbine using BEM method." Journal of Physics: Conference Series, 2626(1), 012028. DOI: 10.1088/1742-6596/2626/1/012028
    11. Mian, H. H., Siddiqui MS, Yang, L., Kvamsdal, T., Asim, T. (2023). "Numerical investigation of blade roughness impact on the aerodynamic performance and wake behavior of horizontal axis wind turbine." Journal of Physics: Conference Series, 2626(1), 012025. DOI: 10.1088/1742-6596/2626/1/012025
    12. Khan, Sardar Muhammad Aneeq, Badar, Abdul Waheed, Siddiqui, Siddiqui MS, Muhammad Zeeshan, Ul Haq, Muhammad Saad, Butt, Fahad Sarfraz. "Modeling and comparative assessment of solar thermal systems for space and water heating: Liquid water versus air-based systems." Journal of Renewable and Sustainable Energy, Vol 15(6), pp. 063702, 2023, DOI: 10.1063/5.0175130
    13. Siddiqui MS, Muhammad Hamza, Badar, Abdul Waheed, Saeed, Muhammed, Asim, Taimoor. "Parametric Analysis Using CFD to Study the Impact of Geometric and Numerical Modeling on the Performance of a Small Scale Horizontal Axis Wind Turbine." Energies, Vol 15(2), pp. 505-526, 2022, DOI: 1996-1073/15/2/505
    14. Asim, Taimoor, Singh, Dharminder, Siddiqui MS, McGlinchey, Don. "Effect of Stator Blades on the Startup Dynamics of a Vertical Axis Wind Turbine." Energies, Vol 15(21), 8135, 2022, DOI: 10.3390/en15218135.
    15. Buccolieri, Riccardo, Carlo, Oliver S., Rivas, Esther, Santiago, Jose L., Salizzoni, Pietro, Siddiqui MS. "Obstacles influence on existing urban canyon ventilation and air pollutant concentration: A review of potential measures." Building and Environment, Vol 214, pp. 1-24, 2022, DOI: 10.1016/j.buildenv.2022.108905
    16. Rahman, Muhammad, Sharif, Farhat, Turkyilmazoglu, Mustafa, Siddiqui MS. "Unsteady three-dimensional magnetohydrodynamics flow of nanofluids over a decelerated rotating disk with uniform suction." Pramana (Bangalore), Vol 96(4), pp. 170, 2022, DOI: 10.1007/s12043-022-02404-0
    17. Siddique, Muhammad Zeeshan, Badar, Abdul Waheed, Jakhrani, Shan Ali, Butt, Fahad Sarfraz, Siddiqui MS, Khan, Muhammad Yasin, Mahmood, Khalid. "Analytical modeling and performance analysis of a solar cooker cum dryer unit." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol 0, pp. 1-26, 2022, DOI: 10.1080/15567036.2022.2025955
    18. Siddique, Muhammad Zeeshan, Badar, Abdul Waheed, Siddiqui MS, Butt, Fahad Sarfraz, Saleem, Muhammad, Mahmood, Khalid, Fazal, Imran. "Performance Analysis of Double Effect Solar Absorption Cooling System with Different Schemes of Hot/Cold Auxiliary Integration and Parallel-Serial Arrangement of Solar Field." Energy, Vol 245, pp. 123299, 2022, DOI: 10.1016/j.energy.2022.123299
    19. Laboratory testbed and methods for flexible characterization of thermal and fluid dynamic behaviour of double skin facades." Building and Environment, Vol 210, pp. 108700, 2022, DOI: 10.1016/j.buildenv.2021.108700
    20. Saeed, Muhammed, Berrouk, Abduallah S., Singh, Munendra Pal, Alawadhi, Khaled, Siddiqui MS. "Analysis of Supercritical CO2 Cycle Using Zigzag Channel Pre-Cooler: A Design Optimization Study Based on Deep Neural Network." Energies, Vol 14(19), pp. 6227, 2021, DOI: 10.3390/en14196227
    21. Siddiqui MS, Jankovic, Aleksandar, Goia, Francesco. "Design and testing of a flexible test bed for thermal and fluid mechanic investigations of double skin facades." In: 15th RoomVent virtual conference: Energy Efficient Ventilation for Healthy Future Buildings: Proceedings Book. Torino: Politecnico di Torino, 2021. ISBN 9788894612301, pp. 558-561.
    22. Butt, Fahad Sarfraz, Badar, Abdul Waheed, Janjua, Ajaz, Siddiqui MS. "Computational study of laminar free convection inside tilting irregular cavity of a batch-type solar collector." Thermal Science, Vol 26(1B), pp. 423-435, 2021, DOI: 10.2298/TSCI200521078B
    23. Siddique, Muhammad Zeeshan, Badar, Abdul Waheed, Jakhrani, Shan Ali, Khan, Muhammad Yasin, Butt, Fahad Sarfraz, Siddiqui MS. "Development and experimental investigation of a novel combined solar cooker and dryer unit." Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol 0, pp. 1-17, 2020.
    24. Farooq AS, Badar AW, Sajid MB, Fatima M, Zahra A, Siddiqui MS. "Dynamic Simulation and parametric analysis of solar assisted desiccant cooling system with three configuration schemes." Solar Energy, Vol. 197, pp. 22-37, 2020, DOI: 10.1016/j.solener.2019.12.076
    25. Saeed, Muhammed, Berrouk, Abdallah S., Siddiqui, Muhammad Salman, Awais, Ahmad Ali. Numerical investigation of thermal and hydraulic characteristics of sCO2-water printed circuit heat exchangers with zigzag channels. Energy Conversion and Management, Vol. 224, pp. 113375, 2020.
    26. Siddiqui MS, Latif STM, Saeed M, Rahman M, Badar AW, Hasan SM. Reduced order modeling of offshore wind turbines wake evolution by proper orthogonal decomposition. International Journal of Heat Transfer & Fluid Flow, Vol. 82, pp. 108554, 2020. DOI
    27. Saeed, Muhammad; Berrouk, Abdallah S.; Siddiqui, Muhammad Salman; Awais, Ahmad Ali. Effect of printed circuit heat exchanger’s different designs on the performance of supercritical carbon dioxide Brayton cycle. Applied Thermal Engineering, Vol. 179, pp. 115758, 2020.
    28. Siddiqui MS, Rasheed A, Kvamsdal T. Reduced order modeling of the aerodynamic characteristics of NACA0015 airfoil at high Reynolds number using van der Pol equation. Ocean Engineering, Vol. 196, pp. 106799, 2019. DOI
    29. Siddiqui MS, Kvamsdal T, Rasheed A. High fidelity computational fluid dynamics assessment of wind tunnel turbine test. Journal of Physics Conference Series, Vol. 1356, pp. 012044, 2019. DOI
    30. Badar AW, Zafar HA, Butt FS, Khan MY, Siddiqui MS. Numerical modeling and parametric study of an innovative solar oven. Solar Energy, Vol. 187, pp. 411-426, 2019. DOI
    31. Siddiqui MS, Rasheed A, Kvamsdal T. Validation of the numerical simulations of flow around a scaled-down turbine using experimental data from wind tunnel. Wind and Structures an International Journal, Vol. 29 (6), pp. 405-416, 2019. DOI
    32. Siddiqui MS, Rasheed A, Tabib M, Kvamsdal T. Numerical investigation of modeling frameworks and geometric approximations on NREL 5 MW wind turbine. Renewable Energy Journal, Vol. 132, pp. 1058-1075, 2019. DOI
    33. Siddiqui MS, Fonn E, Kvamsdal T, Rasheed A. Finite Vol. high fidelity simulation combined with finite element based reduced order modeling of incompressible flow problems. Energies, Vol. 12(7), 127, 2019. DOI
    34. Tabib M, Siddiqui MS, Fonn E, Rasheed A, Kvamsdal T. Near wake region of an industrial scale wind turbine: comparing LES-ALM with LES-SMI simulations using data mining (POD). Journal of Physics Conference Series, Vol. 854, pp. 012044, 2017. DOI
    35. Siddiqui MS, Rasheed A, Tabib M, Kvamsdal T. Influence of Tip Speed Ratio on Wake Flow Characteristics Utilizing Fully Resolved CFD Methodology. Journal of Physics Conference Series, Vol. 854, pp. 012043, 2017. DOI
    36. Siddiqui MS, Rasheed A, Tabib M, Fonn E, Kvamsdal T. On the interaction between Wind Farms and Marine Boundary Layer. Proceedings of the ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering, OMAE2017-61688. DOI
    37. Siddiqui MS, Rasheed A, Tabib M, Kvamsdal T. Quasi-Static & Dynamic Numerical Modeling of Full Scale NREL 5MW Wind Turbine. Elsevier Energy Procedia Journal, Vol. 137, pp. 460-467, 2017. DOI
    38. Tabib M, Siddiqui MS, Rasheed A, Kvamsdal T. Industrial scale turbine and associated wake development comparison of RANS based Actuator Line Vs. Sliding Mesh Interface Vs. Multiple Reference Frame method. Elsevier Energy Procedia Journal, Vol. 137, pp. 487-496, 2017. DOI
    39. Tabib M, Rasheed A, Siddiqui MS, Kvamsdal T. A full-scale 3D Vs 2.5D Vs 2D analysis of flow pattern and forces for an industrial-scale 5MW NREL reference wind-turbine. Elsevier Energy Procedia Journal, Vol. 137, pp. 477-486, 2017. DOI
    40. Fonn E, Siddiqui MS, Rasheed A, Tabib M, Kvamsdal T. A step towards a reduced order modeling of flow characterized by wakes using Proper Orthogonal Decomposition. Elsevier Energy Procedia Journal, Vol. 137, pp. 452-459, 2017. DOI
    41. Siddiqui MS, Rasheed A, Tabib M, Kvamsdal T. Numerical Analysis of NREL 5MW Wind Turbine: A Study Towards a Better Understanding of Wake Characteristic and Torque Generation Mechanism. Journal of Physics Conference Series, Vol. 753(2016), 032059. DOI
    42. Siddiqui MS, Rasheed A, Kvamsdal T, Tabib M. Three-Dimensional Variable Turbulent Intensity Flow Field Characterization of a Vertical Axis Wind Turbine. Elsevier Energy Procedia Journal, Vol. 312-320, 2015. DOI
    43. Saif M, Rabbani T, Akhtar T, Durrani N, Siddiqui MS. Reduced-Order Modeling of Torque on a Vertical-Axis Wind Turbine at Varying Tip-Speed Ratios. Journal of Computational and Nonlinear Dynamics, Vol. 10, pp. 041012, 2015. [DOI](doi.org/ 10.1115/1.4028064)
    44. Siddiqui MS, Durrani N, Akhtar I. Quantification of the Effects of Geometric Approximations on the Performance of a Vertical Axis Wind Turbine: A Numerical Approach. Elsevier Renewable Energy Journal, Vol. 74, pp. 661-670, 2015

    Conference publications

    1. Siddiqui MS, Badar AW, Yang L, Saeed M, Keprate. "Towards an Integrative Framework for Digital Twins in Wind Power," IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 0264-0268 Dec 2023, Singapore.
    2. Keprate A, Sheikhi S, Siddiqui MS, and Tanwar M. "Comparing Deep Learning Based Image Processing Techniques for Unsupervised Anomaly Detection in Offshore Wind Turbines," IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 0274-0278 Dec 2023, Singapore.
    3. Siddiqui MS, Jankovic A, and Goia F. "Development of experimental setup and virtual real-time data acquisition system to access performance of double skin façade," RoomVent, 14-17 June 2020, Torino, Italy.
    4. Fonn E, Brummelen HV, Kvamsdal T, Rasheed A, and Siddiqui MS. "Fast Divergence-conforming reduced order model for flow problems," 6th European Conference on Computational Mechanics, 11-15 June 2018, Glasgow, UK.
    5. Siddiqui MS, Rasheed A, Tabib M, and Kvamsdal T. "Numerical Modeling Framework for Wind Turbine Analysis & Atmospheric Boundary Layer Interaction," 35th Wind Energy Symposium, AIAA SciTech Forum, 2017 (AIAA 2017-1162), doi:10.2514/6.2017-1162.
    6. Ahmed F, Rahman S, and Siddiqui MS. "Optimization of an Internal Combustion Engine's Efficiency for Fuel Conservation and Green Environment," International Conference on Energy Systems and Policies (ICESP), 24-27 November pp 1-9, Islamabad, Pakistan, doi: 10.1109/ICESP.2014.7347006.
    7. Siddiqui MS and Hassan SM. "Optimized Design of a Straight Blade Urban Roof Top Vertical Axis Wind Turbine," International Conference on Energy Systems and Policies (ICESP), 24-27 November, Islamabad, Pakistan, doi: 10.1109/ICESP.2014.7346974.
    8. Siddiqui MS, Ahmad H, and Shaheer M. "Numerical Simulation of a Compressed Air Driven Tesla Turbine," paper number V002T09A009, ASME Power Conference July 28-31, Baltimore, Maryland, USA, doi:http://dx.doi.org/10.1115/POWER2014-32069.
    9. Rabbani T, Saif M, Siddiqui MS, Akhtar I, and Durrani N. "Reduced Order Modeling Of Loads On A Vertical-Axis Wind Turbine," Proceedings of International Bhurban Conference on Applied Sciences and Technology, pp. 298-303 15 – 18 January Islamabad, Pakistan, doi: 10.1109/IBCAST.2014.6778160.
    10. Suleman K, Asim MS, Kamran M, and Siddiqui MS. "Mathematical modeling of a single piston Gasoline Engine and Simulation of Efficiency Parameters," International Conference on Modeling and Simulation, 24-27 September, Islamabad, Pakistan.
    11. Siddiqui MS, Durrani N, and Akhtar I. "Numerical Study to Quantify the Effects of Struts and Central Hub on the Performance of A Three Dimensional Vertical Axis Wind Turbine Using Sliding Mesh," Paper No. POWER2013-98300, pp. V002T09A020 ASME Power Conference, July 26-31, Boston, Massachusetts, USA, doi:10.1115/POWER2013-98300.
    12. Siddiqui MS, Durrani N, and Akhtar I. "Effect Of Third-Dimensionality On Vertical Axis Wind Turbine Blades: A Numerical Study," 2nd International Symposium on Frontiers of Computational Sciences 28-29 June, Islamabad, Pakistan.
    13. Siddiqui MS, Hassan SM, and Kamran M. "Quick Return, flexible flap angle mechanism for a flapping wing Micro Air Vehicle," International Conference on Engineering Sciences, Institute of Chemical Engineering and Technology, February 28-29, Lahore, Pakistan.
    14. Siddiqui MS, Hassan SM, and Kamran M. "Stress Analysis for Active Flapping and Pitching Mechanism of a Micro Air Vehicle," International Conference on Engineering Sciences, Institute of Chemical Engineering and Technology, February 28-29, Lahore, Pakistan.
    15. Kamran M, Siddiqui MS, and Hassan SM. "Comparison among Conventional Blocks and Bricks with Compressed Stabilized Earth Blocks," International Conference on Engineering Sciences, Institute of Chemical Engineering and Technology, February 28-29, Lahore, Pakistan.

    Poster publications

    1. Mian, Haris Hameed; Siddiqui, Muhammad Salman; Yang, Liang; Kvamsdal, Trond; Asim, Taimoor. "Estimating the blade roughness effect on wind turbine performance and wake dynamics," Deepwind conference; 2023-01-18 - 2023-01-20.
    2. Mian, Haris Hameed; Siddiqui, Muhammad Salman; Yang, Liang; Keprate, Arvind. "BEM approach to evaluate leading-edge erosion effects on wind turbine power output," Deepwind conference; 2023-01-18 - 2023-01-20.
    3. Kouaissah, Otman; Franchina, Nicoletta; Siddiqui, Muhammad Salman; Persico, Giacomo. "A Computational Study of H-shape VAWT in Tilted Condition," Deepwind conference; 2023-01-18 - 2023-01-20.
    4. Rasheed A, Tabib M, Siddiqui MS, Kvamsdal T, Kvarving AM, Fuchs F, Okstad KM. "GONE with the WIND," SINTEF Group Meet Dept. of Applied Mathematics, 8-9 May 2017, Oslo, Norway.
    5. Rasheed A, Tabib M, Siddiqui MS, Fonn E, Kvamsdal T, Kvarving AM, Okstad KM. "Multiscale Wind Modelling," SINTEF Group Meet Dept. of Applied Mathematics, 8-9 May 2017, Oslo, Norway.
    6. Fonn E, Rasheed A, Tabib M, Kvamsdal T, Siddiqui MS, Kvarving AM, Okstad KM. "Torturing Data with Artificial Intelligence," SINTEF Group Meet Dept. of Applied Mathematics, 8-9 May 2017, Oslo, Norway.
    7. Mian, Haris Hameed; Siddiqui, Muhammad Salman; Yang, Liang; Kvamsdal, Trond; Asim, Taimoor. "Estimating the blade roughness effect on wind turbine performance and wake dynamics." Deepwind conference; 2023-01-18 - 2023-01-20.
    8. Mian, Haris Hameed; Siddiqui, Muhammad Salman; Yang, Liang; Keprate, Arvind. "BEM approach to evaluate leading-edge erosion effects on wind turbine power output." Deepwind conference; 2023-01-18 - 2023-01-20.
    9. Kouaissah, Otman; Franchina, Nicoletta; Siddiqui, Muhammad Salman; Persico, Giacomo. "A Computational Study of H-shape VAWT in Tilted Condition." Deepwind conference; 2023-01-18 - 2023-01-20.
    10. Rasheed A, Tabib M, Siddiqui MS, Kvamsdal T, Kvarving AM, Fuchs F, Okstad KM. "GONE with the WIND." SINTEF Group Meet Dept. of Applied Mathematics, 8-9 May 2017, Oslo, Norway.
    11. Rasheed A, Tabib M, Siddiqui MS, Fonn E, Kvamsdal T, Kvarving AM, Okstad KM. "Multiscale Wind Modelling." SINTEF Group Meet Dept. of Applied Mathematics, 8-9 May 2017, Oslo, Norway.
    12. Fonn E, Rasheed A, Tabib M, Kvamsdal T, Siddiqui MS, Kvarving AM, Okstad KM. "Torturing Data with Artificial Intelligence." SINTEF Group Meet Dept. of Applied Mathematics, 8-9 May 2017, Oslo, Norway.
    13. Tabib M, Rasheed A, Siddiqui MS. "A 3D Vs 2.5D Vs 2D CFD analysis of 5MW NREL reference wind-turbine to study impact of bluff sections." 14th Deep Sea Offshore Wind R&D Conference, Deepwind, 18-21 January 2017, Trondheim, Norway.
    14. Siddiqui MS, Rasheed A, Tabib M, Kvamsdal T. "Simulating Single turbine and associated wake development - validation and comparison of computational methods (Actuator Line Vs Sliding Mesh Interface Vs Multiple Reference Frame)." 14th Deep Sea Offshore Wind R&D Conference, Deepwind, 18-21 January 2017, Trondheim, Norway.
    15. Siddiqui MS. "Fluid Surface Interaction (FSI) analysis of Mega Watt Size Offshore Wind Turbine." Math Meets Industry Conference, 22-23 September Trondheim, Norway.
    16. Siddiqui MS, Rasheed A, Tabib M, Kvamsdal T. "Numerical Analysis of NREL 5MW Wind Turbine: A Study Towards a Better Understanding of Wake Characteristic and Torque Generation Mechanism." The Science of Making Torque from Wind Conference, Torque, 4-7 October, Munich, Germany.
    17. Siddiqui MS, Rasheed A, Kvamsdal T, Tabib M. "Flow configuration around rooftop wind turbines: A numerical investigation." 12th Deep Sea Offshore Wind R&D Conference, Deepwind, 4-6 February 2015, Trondheim, Norway.

    Scientific reports

    1. Siddiqui MS, Implementation of active learning strategies and flipped classrooms approach in teaching, UNIPED report 2022
    2. Siddiqui MS, Rasheed A, Kvamsdal T. "Novel numerical methods for turbulence treatment in highly turbulent flows." SINTEF Report 2018.
    3. Siddiqui MS, Rasheed A, Kvamsdal T. "Reduced Order Modeling techniques for fluid flow at low Reynolds number." SINTEF Report, 2017.
    4. Siddiqui MS. "PhD Thesis: High fidelity simulation & reduced order modeling of offshore wind turbines."
    5. Siddiqui MS. "Master’s Thesis: Full-scale numerical modeling of wind turbines in complex terrain."
    6. Siddiqui MS. "Bachelor's Thesis: Development of a novel structural and aerodynamic design of flapping wing micro air vehicle."

     

     

     

     

     

     

     

     

     

     

  • Undervisning