Pellet Press Line

Pellet press model: RPM 350.100 Muench - Wupertal, Germany. Recommended maximum capacity is 1,2 t/h for the raw materials. This ring-die pellet mill has a double, continuous conditioner with maximum dwell time of 60 sec. With the usage of a single conditioner the dwell time is 30 seconds. 

The ring-die revolves at 274 rpm.

 

Pellet Press - The most common equipment for animal feed production
Pellet Press - The most common equipment for animal feed production Photo: Frtek
We offer the possibility for small-volume production (30 kg/h) without continuous conditioning.

The pellet press line is assembled with the following sections:

- Pre-bin (or hoper) for storing meal material ready for pelleting 
- Screw feeder accurately delivers a pre-determined quantity of feed compound
- Conditioner is the continuous mixer: steam controls bacteria and the moisture (for the pelleting process). 
- Feed chute is a duct that directs the flow of the conditioned meal into pellet press die.
- Pellet press
- Die and Roll assembly helps form the pellets by compressing the meal. 
- Knives guarantee uniform pellet length. Manual setting is required for demanded length. 
- Discharge section collects and transports pellets for cooling

Infra Red  (IR) thermo camera for better production control
Infra Red (IR) thermo camera for better production control Photo: Frtek

Available die dimensions:


2 mm hole diameter - Total hole lenght & effective compression, ratio 40/40 mm
2,5 mm hole diameter - Total hole lenght / effective compression, ratio 46/46 mm
3 mm hole diameter - Total hole lenght / effective compression, ratio 42/36 mm
3,5 mm hole diameter - Total hole lenght & effective compression, ratio 50/50 mm
3,5 mm hole diameter - Total hole lenght & effective compression, ratio 60/60 mm
5 mm hole diameter - Total hole lenght / effective compression, ratio 60/50 mm
6 mm mm hole diameter - Total hole lenght / effective compression, ratio 60/25 mm
8 mm hole diameter - Total hole lenght & effective compression 85/85 mm
Published 30. June 2014 - 13:18 - Updated 23. May 2017 - 19:43

Norwegian University of Life Sciences (NMBU)

Contact us

Contact info

Click above to find
specific contact info.

Visit us